---
title: "Set Your Box Size"
description: "Type the length, width and height of your box and check the dieline."
url: "https://cad.packative.one/help/guide/configurator/"
language: "en"
---

# Set Your Box Size

When you open a box style, you see its dieline: the flat drawing of your box, with lines
for cutting and folding. You type your sizes on the left, and the dieline updates on the
right.

<figure class="cad-figure" markdown>
![The box size screen](https://cad.packative.one/help/assets/screens/configurator.png)
<figcaption>Your sizes on the left, the dieline on the right, and the totals at the bottom. The numbers match the steps below.</figcaption>
</figure>

## Set the Size

1. <span class="cad-marker">1</span> Under **Main dimensions**, type the **Length**, **Width** and **Height**, in mm.
   The small letters under the names (L, B, H) are the names used on the dieline. B is
   the width. **Board thickness** fills in from the flute, so leave it as it is.
2. <span class="cad-marker">2</span> Open **Options** to change things like the closure style or handholds.
3. <span class="cad-marker">3</span> Wait until the bottom right corner says **Up to date**.
4. <span class="cad-marker">4</span> Check the **Outer size** at the bottom left. This is the size of the flat box.
5. Next, [choose the board or paper](https://cad.packative.one/help/guide/materials/).

!!! tip "Move on with Enter"
    After you type a size, ++enter++ keeps it and moves to the next size; ++shift+enter++
    goes back. In the last size, ++enter++ keeps the value and stays there. ++enter++ skips
    lists and switches; ++tab++ works as before and reaches them too. While your keyboard
    is converting text (Japanese input), ++enter++ only confirms the conversion.

!!! tip "Change a size on the dieline"
    Select a size on the dieline to change it in place. ++enter++ keeps the new value,
    ++esc++ cancels.

!!! tip "Inside or outside sizes?"
    Ask your printer or die maker whether your sizes are inside or outside sizes.

## Good to Know

- **Reset to defaults** brings back the starting sizes. **Undo** brings yours back.
- A size that is too large or too small is held at the limit. A note tells you the limit.
- **Dimensions** shows or hides the sizes on the dieline. Its arrow offers
  **Main dimensions** or **All dimensions**. Your downloads follow this choice.
- **Measure** checks a distance or angle on the dieline.
- **Flip horizontally** and **Flip vertically** mirror the dieline.
- Some box styles have several pieces, such as a lid and a base. Use **Pieces** to see
  one piece at a time.
- The page address keeps all your choices. Share the link and the same box opens.

## If Something Goes Wrong

!!! warning "A warning above the dieline"
    A warning tells you what to check, for example "*n* crease lines run past the cut
    outline." Check your sizes. You can still download the file.

If the screen says "This dieline could not be drawn with these values.", change a size or
select **Back to last working values**. When a template does not allow a combination (for
example a flute that cannot take the stopper), the message says why and what to change.
