Skip to content

Quick Box Setup

Easy configuration lets you set up a box by selecting pictures. You select a box, type its size, and select each closure from a row of picture cards.

The Easy configuration screen

Easy configuration with the side panel of choices next to the box. The numbers match the steps below.

Steps

  1. 1 Under Box type, select one of the three boxes.
  2. 2 Under Main dimensions, type the Length, Width and Height.
  3. 3 Under Material, select the board or paper.
  4. 4 In each group of picture cards, for example Top, select the option you want. The drawing updates.
  5. 5 Select Export at the top right to download the dieline, or Lay out on sheets to fit it on a sheet.

The Three Boxes

Good to Know

  • A group of cards shows only when it changes the drawing.
  • Reset to defaults brings back the box's start values.
  • If you switch the box type, your length, width and height stay.
  • Enter moves from Length to Width to Height; Shift+Enter goes back.
  • The same three boxes are in the library, where you see every setting.