Skip to content

Choose the Board or Paper

The board is the material your box is made of. Your choice sets how thick the board is, so the panels fit when the box folds. It also sets the colour of the box in 3D.

The Material window with the flute and the papers

The board under Material at the bottom of the left panel, with its window open. The numbers match the steps below.

Choose the Board

  1. 1 Open a box style. Under Material at the bottom of the left panel, select the board. A window opens.
  2. 2 For corrugated board, select a Flute. The flute is the wavy layer between the outside and the inside paper. Each flute gives the board its own thickness.
  3. 3 Under Paper, Outside paper or Inside paper, select Choose paper. The paper catalogue opens.
  4. 4 Find a paper: type a name, maker or product code in the search box at the top, or browse Common papers.
  5. 5 Select the paper, then select Use this paper on the right.
  6. Select Done to close the window.
  7. Check Board thickness. It now follows your flute or paper.

The paper catalogue

The paper catalogue, with a paper selected. The numbers match steps 4 and 5.

Good to Know

  • Use the filters, for example Maker, Colour or Eco and use, to narrow the list. Clear all removes them.
  • Select a paper to see its details: maker, weight, thickness, finish and where it is sold.
  • Papers marked "(typical)" show common trade values, not a maker's exact values.
  • Add to favourites keeps a paper under Favourites in this browser.
  • You can type your own Board thickness. Reset to defaults goes back to the paper's or flute's value.
  • Your board choice carries on to 3D, sheet layouts and kit layouts.

Papers from other countries

In Korean or Japanese, papers not sold in that country are marked, for example "Not sold in Korea", and listed last. They are never hidden.

Flutes by region

The Flute list follows the Region you pick (the language alone does not change it). With Japan picked it lists the Japanese flutes: G flute (GF) 1 mm, E flute (EF) 1.5 mm, B flute (BF) 3 mm, A flute (AF) 5 mm and Double wall (WF) 8 mm. Otherwise it lists F, E, B and C flute and the EB and BC double walls. A flute you chose in another region stays in the list. Your company can set the region for everyone in your workspace; you then don't see the Region choice.

The material can change by itself

If you select a paper of another material, the box style switches to that material. A message says "Material changed to … to match the paper."

To add a matte or glossy finish to the box, see See Your Box in 3D.